Bose B2000 Manual de usuario descargar pdf (Pagina 16)

BOSE

EQ Card

EQ card fitting f

or bridged mono operation

The Bose EQ card should be fitted into the channel A connector inside the amplifier

and the input signal should be connected to input A. The bridge switch on the rear of

the amplifier should be set to bridge mode. The output is then taken from the bridged

output

Speakon

socket on the rear of the amplifier.

For Both B

1500

& B2000

-fit the unit s

cover

(BEFORE CONNECTING THE ELECTRICAL POWER

TO THE UNIT)

using the 12 TORX T10 screw

s removed earlier.

For further information

about

BOSE equaliser cards or fitting the equaliser cards into

the B

1500

or B2000 power amplifiers

please

contact

your Bose supplier

1 2 ... 11 12 13 14 15 16 17 18 19

Sin comentarios

Bose B2000 Manual de usuario Pagina 16