Bose FreeSpace 8 Instrucciones de operaciones descargar pdf (Pagina 9)

– +

70V

– +

70V

– +

70V

3.5 Setting taps

Set the transformer to the preferred wattage (Figure 5):

1. Locate the blue wire.

2. Disconnect the smaller tab from the shipped setting (8W on Model 8

loudspeakers, 32W on Model 32 loudspeakers).

3. Reconnect to the preferred tap setting.

3.6 Cutting mounting holes

Cut the mounting hole (Figure 6).

• The hole for a FreeSpace

Model 8 loudspeaker should be 5

" (145 mm).

• The hole for a FreeSpace Model 32 loudspeaker should be 7

" (182 mm).

Note: Check for electrical conduits and other hazards before cutting the mounting

hole. Also avoid glass fiber insulation. Insulation can interfere with the mounting

springs, making installation or changing tap settings difficult. It can also compress

and push the loudspeaker out of the mounting hole after installation.

Model 8

tap settings

Figure 6

/4" (Model 8)

/16" (Model 32)

3.0 Before You Begin

Model 32

tap settings

Figure 5

AM177915_03_V.pdf • May 6, 2002

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Sin comentarios

Bose FreeSpace 8 Instrucciones de operaciones Pagina 9